Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
TROUBLESHOOTING
Read and follow assembly instruction. If the UNTIO SPARKLE
JUICE·BAR smart water system does not functioning properly
please check troubleshooting table. If the water system still not
working properly, disconnect it and contact authorised UNITO
customer service for assistance. When calling for assistance
please provide your product model and serial number.
Symptom
Possible Cause
- Main water supply valve
is turned off.
- The water system is not
connected properly.
No water
flowing, the
water is
- Hoses are bended.
flowing too
slowl
- There is limescale or dirt
in the aerator.
- Filter connection is in the
wrong direction.
The water is
- There is no or too little
sputtering or
water pressure.
is irregular
Air/water
dripping from
the faucet
- High pressure in CO2
while
cylinder.
preparing
soda
- The Chiller is powered
off or not connected to
power supply wall socket.
No Chilled
- Faulty function of chiller.
water
- Faulty
cables/hoses/control knob.
- The CO2 cylinder not
installed or not installed
properly.
No Soda or
- CO2 cylinder is empty.
Soda weak
- Soda intensity setting is
low.
- The Flavor pouch not
installed or not installed
properly.
- The flavor pouch is
No Flavor or
Flavor is weak
empty.
- Flavor intensity setting is
low.
23
ERROR LIST
Solution
- Turn on the main water
supply valve.
- Connect all the cable
and hose correctly.
- Straighten the hoses.
- Clean/replace the
aerator.
- Check the filter
connection.
- Check the water
pressure. It should be
above 1.0 bar. Check a
different tap. If the
pressure is also low
there, check the mains
water tap and contact
your water supplier.
- Normal behavior due to
high pressure, normally
when using a new
cylinder.
- Connect to power
supply.
- Restart the system.
- Contact UNITO
customer service.
- Install the CO2 cylinder
properly.
- Replace with a new
CO2 cylinder.
- Change to a higher level
soda through the UNITO
LIMITED WARRANTY
App
1. WARRANTY PERIOD & COVERAGE
Ÿ
- Reinstall the flavor
pouch.
Ÿ
- Replace with a new
Flavor pouch.
- Change to a higher
intensity level flavor
through the UNITO App.
Panel Display
Description
(chiller)
Water leakage detected
Chiller not
activated
Flavor
Chiller malfunction
This product has been manufactured and tested to the
highest quality standards by UNITO, and comes with two-year
warranty from the date of purchase.
This warranty covers only your UNITO manufactured product.
Limited warranty is applicable to defect in material or
workmanship as follows: Within warranty period, UNITO will
repair or replace any part of the product that proves defective
because of improper workmanship and/or material, under
normal installation, use, service and maintenance. There will
be no charge for parts and labor.
Follow up action
Turn off water supply,
remove system
power cable and call
UNITO service
Complete installation
Requires service
Advertenties
Inhoudsopgave
