Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
English
8. INSTALLER PARAMETERS
Modification of these parameters is reserved for professionals.
To access to these installer parameters, installer has to go to user parameter number 14. After, he
presses and holds validation/menu key
16
|
|
|
Nederlands
Français
Professional menu
This menu permits to access to installer parameter menus.
Pressing and maintaining validation key
eter of installer menus.
When validation/menu key
User menu exit
Press validation key
screen.
Accessing to installer parameters
holding
button
Wired PiLote configuration
Using H&C or clock signal, thermostat has to be defined in slave
or master configuration.
- "SLA": slave configuration
- "MAS": Master configuration
Default value: SLA
Selecting temperature sensor used for the regulation
- AIR:
regulation with internal sensor
- Amb: regulation with external sensor
- FLR:
regulation on floor sensor (external sensor of remote)
- FLL:
regulation with floor sensor and air sensor
To select "Amb", "FLR" or "FLL" regulations, external sensor has
to be connected to thermostat. (see paragraph 9 "Temperature
sensors used for regulation" for more information).
Default value: Air
Deutsch
is hold:
Accessing to installer parameters
holding
holding
button
button
to exit user menu and return to the main
during 5 seconds.
holding
button
Other value: MAS
Other values: Amb / FLL / FLR
displays first param-
Installer
parameters
or
releasing
button
Installer
parameters
or
releasing
button
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
