Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operation
Icon
Function
Power/
A
Standby
B
Heat
C
Temp Down
D
Temp Up
Change Fahrenheit
(
F) to Celsius (
0
0
Heat Enable
Heat Disable
Description
Press to activate the current standby state (On/Off).
• Standby State On
Press to turn everything Off. Press again to activate
the previous state.
• Standby State Off
Press to activate the previous state.
- If the flame effect was On, the previous heat setting
will be activated (On or Off).
- If the flame effect was Off, the previous heat setting
will be activated (High or Low).
Press again to turn everything Off.
• Heat On
Press to turn heat On (indicated by 1 short beep and
the icon appearing on the display). Displays current
heater temperature setting. Use the Temp Up/Down
icon to change the heater temperature setting.
• Heat Off
Press to turn heat Off (indicated by 1 short beep).
!
NOTE: After the heater is switched off, the fan will
continue on for 60 seconds before turning off.
Press multiple times to lower the heater temperature
in 1
F (1
C) increments. Displays current
0
0
temperature; lowest temperature is 41
feature is active whenever the heat is enabled.
Press multiple time to raise the heater temperature in
1
F (1
C) increments. Displays current temperature;
0
0
highest temperature is 99
active whenever the heat is enabled.
Press both Temp+ (
C)
Hold both Heat (
2 seconds. Temperature displays on the screen.
Hold both Heat (
for 2 seconds, when temperature is adjusted "---"
displays on the screen.
F (37
C). This feature is
0
0
) and Temp– (
) and Temp– (
), on the unit, for
) and Temp– (
), on the unit,
F (5
C). This
0
0
) on the unit.
9
Advertenties
Hoofdstukken
Inhoudsopgave
