Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2.4.4 Measurement Mode Switch
Release the "MEAS" button and press the "MODE" button before the instrument auto power
off(released the "MEAS" button this instrument will auto power off in 15 sec).There are two group of
measurement. You can press the "MODE" button once to change from RPM,rpm,HZ,....to the next
sequentially. Press the "MODE" button and hold for approx.3 sec to leap to the next group .Then you
can press the "MODE" button once to change from REV,M,In....to the next sequentially. Selected the
mode of you need, depress the "MEAS" start measures.
RPM: Non-Contact revolutions per minute measurements.
*
rpm: Contact revolutions per minute measurements.
*
HZ : Non-Contact /Contact frequency measurements.
*
M/M: Contact Meter per minute measurements.
*
I/M: Contact Inch per minute measurements.
*
F/M : Contact Feet per minute measurements.
*
Y/M: Contact Yard per minute measurements.
*
REV: Revolution measurements.
*
M : Length measurements in the uit of meter.(Using the master 10cm circumference wheel.)
*
In : Length measurements in the uit of inch. (Using the master 10cm circumference wheel.)
*
FT : Length measurements in the uit of feet. (Using the master 10cm circumference wheel.)
*
Yd : Length measurements in the uit of yard. (Using the master 10cm circumference wheel.)
*
16
Advertenties
Inhoudsopgave
