Advertenties
Beschikbare talen
Beschikbare talen
B
2.
Pour in the detergent.
3.
Insert the plug into the socket. The power supply refer to last page"Product fiche".
Make sure that the water supply is turned on to full pressure.
4.
Close the door, press the Power button.
5.
Choose a program, the response light will turn on. Then press the Start/Pause button,
the dishwasher will start its cycle.
CHANGING THE PROGRAM MID-CYCLE
A program can only be changed if it has been running only for a short period of time,
otherwise the detergent may have already been released or the wash water with detergent
has already been drained. If this is the case, the dishwasher needs to be reset and the
detergent dispenser must be refilled. To reset the dishwasher, follow the instructions below:
1.
Press the Start/Pause button to pause the washing.
2.
Press Program button"<"or">" more than three seconds the machine will be in program
selection mode
3.
You can change the program to the desired cycle setting.
FORGET TO ADD A DISH?
A forgotten dish can be added any time before the detergent dispenser opens. If this is the
case, follow the instructions below:
1.
Press the Start/Pause button to pause the washing.
2.
Wait 5 seconds then open the door.
3.
Add the forgotten dishes.
4.
Close the door.
Using the appliance
3 sec
31
EN
Advertenties
