Download Print deze pagina

FLINQ Coolcube FQC8327 Handleiding pagina 3

Advertenties

Beschikbare talen

Beschikbare talen

EN
Manual
5V/2A
Input Power Consumption Type-C
DC
Output Power Consumption
8W max.
Rated input power consumption
10W max.
Standby current
90uA
Noise sound level
<45dB
Fan speed
1650 ~ 2700RPM by power slider selectable
2.5m/s ~ 3.8m/s
Wind speed
Materials
ABS plastics
Temperature range
Storage between 21 ~25 degrees and -20 ~ 45 degrees
max
This product is an fan product. It is developed for giving free flow wind. This is a normal
household item not for professional / commercial use. Read and follow the instructions
contained in this manual carefully. Keep these instructions at a safe place for future reference or
give to third parties. IP X2: Only for indoor use. Never immerse this device under water.
The operating life of the product will be less if the ambient temperature is higher than
45°C or lower than -10°C.
Warning
During the first use of the product, charge by the TYPE-C USB charge cable (included)
Please use a dedicated 5V USB charger with minimum 2A ( 2000mA or higher) output!
- Do not put the power supply into the water or get it wet!
- Do not charge the power under fire or extremely hot conditions!
- Do not use or store power near heat sources such as fire or heaters! If the fan leaks or gives off
an odor, remove it immediately from near an open flame.
- Please use a dedicated 5V USB charger with minimum 5V / 2A output!
- Do not put the fan into the fire or heat the fan!
- Do not use wires or other metal objects to short-circuit the positive and negative terminals of
the fan. Do not transport or store the fan with necklaces, hairpins or other metal objects!
- Do not use nails or other sharp objects to Pierce the fan housing, do not hammer or pedal the
power supply!
- Do not hit, throw or cause mechanical vibration to the fan
- Do not weld power terminals directly!
- Do not transfer the power into the microwave oven or pressure vessel!
- Do not decompose the battery in the product by any means
- It is prohibited to use in combination with a primary fan( such as dry batteries) or different
capacity, model, and variety of power supplies!
- Do not use the power supply if it gives off odor, serious heat, deformation,
any other abnormal phenomenon: If the power supply is in use or charging, take it out of the
electrical appliance or charger immediately and stop using it!
- Do not disassemble the product without authorization. Transform!
- If the battery is stored for more than half a year, please charge the product with the charger
with the specified parameter range.
- Never put fingers, pencils or other objects thru the fan raster when it's in use
- Do not use the fan near a window as rain can cause electrical danger and do no use near
curtains, plants etc.
Battery warning note
New batteries must be recharged and discharged 3 ~ 5 times before their full function use
time is released. Charge indoors only at room temperature and only under supervision during
daytime. Disconnect from the charger when the battery is fully charged,
as overcharging can shorten battery life. Lithium batteries should only be charged with constant
current/constant voltage (CC/CV). When not in usage, the charge in a fully charged battery slowly
disappears. Do not place the product near a heat source or expose it to direct sunlight, dust,
moisture, rain or mechanical impact. Try to keep the battery temperature between 0°C and 45°C
at all times. If the battery is too hot or too cold, the product may not work temporarily, even
if it is fully charged. Do not attempt to charge the device when the battery is damaged. Never
insert metal objects in any opening of the (USB) charging port. The rechargeable battery is built
into the device and cannot be replaced. Do not throw the battery into the fire, otherwise it may
explode. Batteries may also explode if being damaged, please handle and disposal it according
to local conditions and regulations. After 3 months long storage, need to completely discharged
and recharge for at least 80%. The battery used in this device may present a risk of fire or
chemical burn if mistreated. Do not disassemble, short contacts, heat above 60°C (140°F), or
incinerate. Keep away from children. Do not disassemble and do not dispose of
in fire.
- Ensure that the device do not come into contact with heat sources, hot objects or naked
flames.
- Do not attempt to charge the device when the battery is damaged.
- Leaks from battery cells can occur under extreme conditions. If the liquid gets on the skin,
wash it immediately with soap and water. If the liquid gets into the eyes, flush them directly
with clean water for at least 15 minutes and seek medical attention.
Pay attention
- Please note that the charging port of the device should not have water infiltration. Otherwise, it
will cause a product failure.
- Do not charge or store the product in a place below -10 or above 45, otherwise the product
performance will be reduced.
- It is a normal phenomenon that temperature of the charger rises during charging.
FlinQ Coolcube
discoloration or

Advertenties

loading

Deze handleiding is ook geschikt voor:

Coolcube fqc8328