The operational panel also has 7 indicator lights that show which
settings are active and a display (Led window) that shows any values
set.
Before using the air conditioner, check:
That it has been installed according to safety instructions
That it is not damaged or broken
That the electrical socket that you wish to use has the same
voltage as is given on the unit's specification plate (220-240V /
50Hz)
That no other devices are connected to the same socket
If this has all been checked, you can insert the plug into the socket.
Start the unit by pressing on the ON/OFF button.
Use the Function selector button to choose a specific function:
cool, dehumidify or fan. Every time you press the button, the function
changes. The lights show which function is active. If you are cooling
or dehumidifying, wait for up to 3 minutes after switching on or off
before switching the unit on or off again. The compressor needs this
time to recover.
Use the Fan speed button to set the fan to high or low.
If you wish to cool, you can use increase or decrease the
temperature using the Temperature up/down buttons. Every time you
press these buttons, the set temperature will increase or decrease by
one degree. The display shows the value set. The temperature can
be set to between 16 and 31°C.
If you wish to dehumidify, press the function selector button until the
'dehum' light comes on. Check that the water outlet hose is correctly
connected, see page 6! Set the temperature to 2 degrees below the
current room temperature (between 16 and 31°C) and the fan to low.
If you wish to ventilate, use the function selector button to choose
'fan'; you can then set fan speed to high or low using the fan speed
button.
The Timer button allows you to automatically start or stop the air
conditioner at a set time.
Automatic starting: the air conditioner is off. Press the timer button
and choose the moment that you would like it to start working using
the temperature buttons: each time you press 'temperature up' the
hour will increase, each time you press 'temperature down', the hour
will decrease. If, for example, the display shows 5 hours, the air
conditioner will switch on in 5 hours.
19