Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Wall mount placement:
The Wall Mount is also the charger for N-Joy Controller. Find the most strategic place –
related to the Bluetooth receiver - to locate the wall mount. There are 3 ways to connect the
wall mount to a power outlet:
1
Built-in: With the included adapter and USB/Micro-USB cable (300 cm):
Make sure a 5/8" electrical conduit is built into the wall, ending on one side on the spot
where you wish to place the wall mount, and on the other side near a power outlet.
The length of this 5/8" tube should not exceed 250 cm. Lead the power cable through
this tube, with the Micro-USB side on the end of the wall mount. Insert the included
adapter in the power outlet and connect the USB cable to it. Connect the Micro-USB
to the back of the
mount is clean and dry. Remove the cover layer of the tape strip on the back of the
wall mount.
mount is placed and ready for use.
*
Check if the wall mount functions in charging the controller before you place it on the
wall, the wall mount cannot be easily removed once attached.
2
Built-up: With the included adapter and USB/Micro-USB cable (300 cm):
The USB cable will remain visible with this method. Connect the Micro-USB to the
back of the
the USB cable to it. Make sure the surface where you will place the wall mount is
clean and dry. Remove the cover layer of the tape strip on the back of the wall mount.
Place*
the wall mount and press is to the wall for 5 seconds. The wall mount is placed
and ready for use.
*
Check first if the wall mount functions in charging the controller before you place the
part to the wall, the wall mount cannot be easily removed once attached.
All manuals and user guides at all-guides.com
wall
mount*. Make sure the surface where you will place the wall
Place*
the wall mount and press it to the wall for 5 seconds. The wall
wall
mount*. Insert the included adapter in the power outlet and connect
21
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
