Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
WARNING!
►
The power tool creates an electromagnetic
field during operation. This field can, in cer-
tain circumstances, impair active or passive
medical implants. To reduce the risk of fatal
injuries, we recommend that people with
medical implants consult their doctor and the
manufacturer of the medical implant before
operating this machine.
Safety guidelines for battery
chargers
This appliance may be used by
■
children aged 8 years and above
and by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks. Do not allow
children to use the appliance as a
toy. Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised.
To avoid potential risks, damaged
■
mains cables should be replaced
by the manufacturer, their customer
service department or a similarly
qualified person.
The charger is suitable for indoor use
only.
PFMRA 20-Li A1
WARNING!
■
To avoid potential risks, damaged mains
cables should be replaced by the manufac-
turer, their customer service department or a
similarly qualified person.
CAUTION!
♦
This charger can only charge the following
batteries: PAP 20 A1/PAP 20 A2/
PAP 20 A3/PAP 20 B1/PAP 20 B3/
PAPS 204 A1/PAPS 208 A1.
♦
A current list of battery compatibility can
be found at www.Lidl.de/Akku.
Before use
Charging the battery pack (see fig. A)
CAUTION!
►
Always disconnect the mains plug before
removing the battery pack 5 from or
inserting it into the charger e .
NOTE
►
Never charge the battery pack at an ambient
temperature of below 10°C or above 40°C.
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level
is between 50% and 80%. The storage climate
should be cool and dry and the ambient tem-
perature should be between 0°C and 50°C.
Insert the battery pack 5 into the charger e
♦
(see fig. C).
♦
Insert the mains plug into the mains socket.
The red control LED w lights up.
♦
The green control LED q indicates that the
charging process is complete and the battery
pack 5 is ready for use.
GB │ IE │ NI
│
7
■
Advertenties
Hoofdstukken
Inhoudsopgave
