Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Unpack the electric halogen patio heater making sure that all the items are present and that there are
no components left in the box and that the heater head is free from any packing material.
Using the detailed drawing follow the three steps to assemble your halogen heater.
Do not connect the halogen heater to the electrical supply until all the assembly is complete.
Do not connect the halogen heater to the electrical supply if any of the components or the power cord
is damaged in any way.
If in doubt contact your supplier.
EC declaration of conformity
This is to certify that
The PACHA30 Halogen Heater conforms to the standards:-
IEC/EN55014-1; IEC/EN 55014-2; IEC/EN61000-3-2;
IEC/EN61000-3-3; IEC/ EN60335-1; IEC/EN60335-2-30
Assembly Instruction
Step one: Unpack the electric halogen patio heater making sure that all the items are present
Step two: Place the Heater Mounting Part A on a Pole which diameter is between 25mm – 60mm.
Step Three: Slip the Mounting Part B and fit it to the Mounting Part A from the bottom up.
Step Four: Turn the Fixation Screw until the Mounting Part A is fixed on the pole
Advertenties
Inhoudsopgave
