Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
E
II 3 G Ex mc IIC T4 Gc, II 3 D Ex mc IIIC T135°C Dc
Cert. ARTIDOR 23ATEX9999
TF & Serial No.: AS239999
WARNING
Artidor Explosion Safety B.V., Emopad 38, 5663 PB Geldrop, The Netherlands
Example of an AR-048 warning light label
7.
Installation instructions
•
Installation of explosion-safe equipment such as this product must be carried out by
personnel specially trained and qualified to do this, following the relevant requirements
of the installation standard EN 60079-14.
•
For the installation and use of this product the relevant safety regulations and also the
generally recognized latest state of the technology apply.
•
During assembly, care must be taken that the framework, screws and surface are strong
enough to take the weight of the warning light.
•
Isolate power from the electrical supply cable prior to installation.
•
Mount the warning light on a metal frame connected with ground (equipotential bonding).
If this is not possible, connect an earth wire to the external earth boss and ensure that
this is in sufficient electrical connection with ground.
•
Install the connection cable and make sure that it is protected from mechanical and
chemical influences.
•
Connect the end of the cable in a proper way to an external connection box and ensure
this is done professionally. The connection box is not supplied. Use a connection box
that it is suitably protected for the (explosion hazard) classification of the surroundings in
which it will be used.
•
The 4-wire connection cable has the following connections:
Function
Continuous mode supply voltage (+)
Blinking mode supply voltage (+)
Neutral (-)
Ground
Installation manual AR-048 LED warning light
8 / 36
AR-048 WARNING LIGHT
Light color: red
-20 °C < Ta < +60 °C
To avoid electrostatic charge clean only
with a damp cloth. Do not use solvents.
Wire number
1
2
3
Green / Yellow
Year: 2023
24 VDC, 160 mA
12-2022
Advertenties
Hoofdstukken
Inhoudsopgave
