Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1.
General
Artidor's omnidirectional explosion-safe LED warning light is designed for use under the most
demanding conditions. The robust stainless steel housing and 4 mm impact-resistant
window, the O-ring seal and cast electronics ensure that the lamp is completely impervious
to water and salt.
The latest generation LEDs ensure a clearly perceptible visual signal. Dependent on the
selection of the user, the light will burn continuously or it blinks at a frequency of 1 Hertz. The
warning light can be ordered either with a radial cable connection or with a bottom
connection. This makes the lamp highly suitable for use as a warning light on control
cabinets.
The connection cable has a standard length of 5 meters. For application under less
demanding conditions there is also a version available with an anodized aluminum housing.
The Artidor LED warning light is explosion-safe and certified in accordance with European
Directive 2014/34/EU (ATEX 114) and is CE marked.
2.
Safety Instructions
The warning light AR-048 is an explosion-safe product suitable for use
in hazardous areas with explosion hazard from flammable gases, vapors,
mist and dust, classified as Zone 2 or Zone 22.
This manual must be read and understood for safe use of the warning lights. All warnings
and instructions must be followed.
•
Installation must be carried out by personnel trained and qualified in explosion safety
taking the instructions mentioned on the equipment and in this manual into
consideration. Local regulations that apply to the installation must be followed.
•
Connect this equipment to the direct current supply voltage for which it is designed.
•
Isolate electrical power to the warning light before electrical installation.
•
The transparent lens can be electrostatically charged. Only use a damp cloth to clean
the lens. Do not use solvents.
•
Either decommission the warning light or do not use it when it is damaged.
•
During installation of the warning light national safety regulations must be observed.
•
Only use the warning light under the environmental conditions for which it is specified.
Deviating environmental conditions can contribute to damage to the equipment and may
lead to possible danger to the life of the user.
•
Do not use the warning light at temperatures deviating from the specified ambient
temperature range.
Installation manual AR-048 LED warning light
E
12-2022
5 / 36
Advertenties
Hoofdstukken
Inhoudsopgave
