Bosch Drive Unit Gebruikershandleiding pagina 18
Verberg thumbnails
Zie ook voor Drive Unit:
- Oorspronkelijke gebruiksaanwijzing (26 pagina's) ,
- Gebruiksaanwijzing (25 pagina's) ,
- Oorspronkelijke gebruiksaanwijzing (24 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
English–5
To change the basic settings, press the On/Off button 5 next
to indication "–" to reduce or scroll down, or the lighting but-
ton 2 next to indication "+" to increase or scroll up.
If the on-board computer is inserted in the holder 4, it is also
possible to change using buttons "–" 12 and "+" 13 on the
operating unit.
To exit the function and save a changed setting, press the
"RESET" button 6 for 3 s.
The following basic settings are available:
– "clock": The current time can be set here. Pressing and
holding the setting buttons fast-forwards the setting
speed.
– "wheel circum.": You can change this value pre-set by the
manufacturer by ± 5 %. This value is displayed only when
the on-board computer is in the holder.
– "English": You can change the language of the text indica-
tions. You can choose between German, English, French,
Spanish, Italian, Dutch and Danish.
Error Code Indication
The components of the eBike system are continuously and au-
tomatically monitored. When an error is detected, the respec-
tive error code is indicated in text indication d.
Press any button on the on-board computer 3 or on the oper-
ating unit 10 to return to the standard indication.
Code
Cause
410
One or more buttons of the on-board
computer are blocked.
414
Connection problem of the operating
unit
418
One or more buttons of the operating
unit are blocked.
422
Connection problem of the drive unit Have connections and contacts checked.
423
Connection problem of the eBike
battery pack
424
Communication error among the
components
426
Internal time-out error
430
internal battery pack of the on-board
computer is empty
440
Internal error of the drive unit
450
Internal software error
490
Internal error of the on-board
computer
500
Internal error of the drive unit
0 276 001 SAI | (16.7.14)
– "unit km/mi": The speed and distance can be displayed
either in kilometres or miles.
– "time format": The time can be displayed either in the
12 hour or 24 hour format.
– "Shift recom. on/off": You can switch the indication of a
shift recommendation on and off.
– "power-on hours": Indicates the total travel duration with
the eBike (not changeable).
– "Displ. vx.x.x.x": This is the software version of the
display.
– "DU vx.x.x.x": This is the software version of the drive
unit. This value is displayed only when the on-board com-
puter is in the holder.
– "Bat vx.x.x.x": This is the software version of the battery
pack. This value is displayed only when the on-board com-
puter is in the holder.
Depending on the type of error, the drive unit is automatically
shut off, if required. Continued travel without assistance from
the drive unit is possible at any time. However, have the eBike
checked before attempting new trips.
Trouble-shooting actions may be performed by the
owner except those explicitly noted as "Contact your
Bosch eBike dealer".
Corrective Measure
Check if any buttons are blocked, e.g. from dirt or debris. Clean the
buttons, if required.
Have connections and contacts checked.
Check if any buttons are blocked, e.g. from dirt or debris. Clean the
buttons, if required.
Have connections and contacts checked.
Have connections and contacts checked.
Restart the system. If the problem persists, contact your Bosch eBike
dealer.
Charge the on-board computer (in the holder or via the USB port)
Restart the system. If the problem persists, contact your Bosch eBike
dealer.
Restart the system. If the problem persists, contact your Bosch eBike
dealer.
Have the on-board computer checked
Restart the system. If the problem persists, contact your Bosch eBike
dealer.
Bosch eBike Systems
Advertenties
Inhoudsopgave
