Download Print deze pagina

MESTIC MCC-35 Gebruiksaanwijzing pagina 9

Advertenties

Beschikbare talen

Beschikbare talen

Safety in use
Always remove the plug from the device when it needs to be maintained or cleaned.
Never use the device in the vicinity of hot or hot objects.
Prevent the device from coming into contact with rain.
Do not place other electrical devices in the device.
Do not place chemical or explosive agents in the device.
Only use the DC 12V or 230V connection cable (not included). NOTE: never use both energy sources at the
same time.
Defrost the device regularly to ensure that the device functions optimally.
Do not pull on the connecting cord, but pull on the plug to remove the cord from the socket.
If the cool box is connected to the DC socket, disconnect your cool box and other consumers from the battery
before you connect a fast charger
If the cool box is connected to the DC socket; switch off the cool box or break the connection when you switch
off the engine. The battery can be discharged otherwise.
Pay attention! That the heat that arises during the operation of the cool box can be properly dissipated.
Enough distance between product and objects and walls.
Never immerse the device in water
Ventilation slots are not covered at all times.
Accessories (not included with the shipment)
1502950 Mestic AC adapter for MCC-25 & 35 (220-240)
Use
Remove all packaging materials from the device.
Place the device on a fl at and stable surface with at least 10 cm of free space on each side.
Do not switch the appliance on immediately after you transport it, where the cool box has been tilted more
than -30 °. This could cause damage to the cooling system. The device must fi rst stand upright for 30 minutes
so that the coolant can be collected again in the compressor. This prevents the compressor from running dry.
Look at the above user conditions before use.
For hygienic reasons, you must clean the inside and outside of the appliance with a damp cloth before using
your cool box. (see paragraph
Connect the cooler box.
1.
2.
3.
1
4.
2
5.
3
3
4
5
Control panel
Switching on and off: press and hold the on / off button for 3 seconds, the refrigerator will
now start or switches off
Fast cooling / energy saving mode: In the unlocked state, press the set button to quickly
switch between cooling mode MAX and energy saving mode ECO.
Temperature adjustment: press the + or - button to adjust the temperature, the adjustment
range is minus 20 degrees Celsius to 20 degrees Celsius; After the adjustment, the display
will stop blinking after 3 seconds. The temperature is now set, after which the display
jumps back to the current temperature.
Screen lock / unlock: the control panel locks the screen automatically within 10 seconds
without any touch, the screen displays this; press any button in the Lock screen status,
theft fl ashes on the screen; press and hold the release button for 2 seconds to unlock
USB charging port: 5V, 2.1A, for charging digital devices such as mobile phones and
tablets
ENGLISH

Advertenties

loading