Advertenties
Beschikbare talen
Beschikbare talen
ENGLISH
Battery power detection
The cooler box has the function of current detection of the battery voltage when the cooler box is switched on and
the voltages below correspond to the following electrical quantity icons.
Battery check
1.
Battery protection function for the cooler with three-class battery protection function, can automatically check
the battery voltage of the vehicle, before the electricity consumption will affect the normal functions of the car.
The cool box will stop automatically to ensure that the car's battery does not run out.
2.
Method for adjusting the battery protection: Unlock the cool box by holding down the release button after
which you press and hold SET for 3 seconds to show the current battery protection position of the refrigerator.
By tapping the SET button, it is adjusted to the desired H-class, M-middle or L-layer. The factory setting is H
3.
Battery protection voltage parameter value and the remaining power is displayed on the screen.
Tip: It is recommended to set the H-class when the cool box is connected to a vehicle, otherwise the car's battery
may be too empty and affect the normal ignition of the car; When connecting the cool box to an external or backup
battery, it is recommended to set the M-mid range so that the cool box can work longer.
Tip: Due to the difference in the output voltage of different cars, such as the car refrigerator, the input voltage is too
low for normal cooling (the error code on the screen shows F1), the battery protection equipment can be reduced
by one
Advertenties
