Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ENGLISH
6. Installation of the air conditioner
1.
Unpack the machine and accessories and check that the hose between the indoor and outdoor unit is properly
connected. Also check whether the condensation drain has a rubber cover. Finally, check whether the accessories
are complete.
2.
Install the accessories as shown in the picture. Connect the outer bracket to the support block and the inner
bracket by tightening the hand screws. This is how you form the carrying handle.
2.1 Install the bracket as shown in the figure below. Install the indoor and outdoor units on the bracket to fix the two
parts. To secure the units to the bracket, tighten the hand screws in the appropriate holes.
2.2 Place the shock resistant rubbers on the back of the outdoor unit.
Shockproof rubber dampers
2.3 Install the complete unit in the caravan window and tighten the bracket properly (see figure).
Indoor unit
Lock
Shockproof rubber dampers
Bracket
Outdoor unit
Hose
Advertenties
Hoofdstukken
Inhoudsopgave
