Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Programming
GB
SETTING
INTERMEDIATE POSITION, VENTILATION/TILT, PROG END LIMIT
(Time/position programming)
1.You have confirmed the HOLIDAY menu level. INTERMEDIATE
POSITION will appear.
2.You can set the switching time to move to the INTERMEDIATE
POSITION using the +/- button. The switching time is indicated
in a few seconds or you can move to the INTERMEDIATE
POSITION from the upper end limit using the DOWN/UP button.
3. Confirm by pressing OK.
4.You can set the switching time to move to VENTILATION/TILT
using the +/- button. The switching time is indicated in a few
seconds or you can move to the VENTILATION/TILT from the
lower end limit using the UP/DOWN button.
Confirm by pressing OK.
5.You have confirmed the VENTILATION/TILT menu level.
PROG END LIMIT/PROG INTERMEDIATE POSITION or
PROG VENTILATION/TILT will appear.
6.You can select PROG END LIMIT, PROG INTERMEDIATE
POSITION and PROG VENTILATION/TILT using the
+/- button.
7. Confirm your selection by pressing OK.
8. The function PROG END LIMIT has now been set.
Please read on for further programming options using the
SETTING menu.
52
Advertenties
Hoofdstukken
Inhoudsopgave
