Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Explanation of functions/terms used
Explanation of functions/terms used
General
Manual/automatic sliding switch
In the 'Man' sliding switch setting, only manual command controls
are carried out (e. g.: UP , STOP, DOWN by pressing the relevant
buttons).
In the 'Auto' sliding switch setting, automatic command controls
are carried out (e. g. shade function, time, astro evening
function ...).
Transmission control light
A radio signal is indicated by the transmission control light being
lit.
If the battery starts running out, the transmission control light
flashes during transmission. The transmitter power and/or radio
range is reduced when the battery is running low. If the trans-
mission control light is no longer lit when the button is pressed,
the batteries must be changed.
Group control
Group control means controlling one or several receivers at
the same time.
Group selector
i-R Multi Send
With the group selection button you can select one channel from
the 5 channels and the control centre (illuminates all 5 LEDs). The
individual channels are automatically allocated to the control
centre.
i-R Multi Send Plus
With the group selection button you can select one channel from
6 channels. If channel 6 is to be the control centre, the individual
channels must be programmed to channel 6.
39
GB
Advertenties
Hoofdstukken
Inhoudsopgave
