Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operating Instructions
Aluminium Wall Light with Sensor
Item no: 3014221
1 Operating Instructions for download
Use the link
www.conrad.com/downloads
complete operating instructions (or new/current versions if available). Follow the instructions
on the web page.
2 Intended use
The product is an outdoor LED light with PIR sensor that has adjustable light behavior, sens-
ing distance, and activation intervals.
Important:
The product has an IP54 ingress protection rating. It is protected against light splashes of
water from any direction.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
3 Delivery contents
■
Product
■
2x mounting screws & dowels
■
2x rubber sealing rings
■
Operating instructions
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by elec-
tric shock.
Earth ground
Read the operating instructions carefully.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
5.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the
product.
4
(alternatively scan the QR code) to download the
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-
eration can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 LED light
■
Do not look directly into the LED light!
■
Do not look into the beam directly or with optical instruments!
5.6 Electrical installation
WARNING! Safety hazard!
The product should only be installed by people with relevant electrical knowledge and exper-
ience! *)
If it is not installed properly, you risk:
■
your own life
■
the life of user of the electrical device
■
severe damage to property, e.g., by fire
■
personal liability for personal injury and material damage
Always consult an electrician!
*) Technical knowledge required to perform the installation:
For the installation, the following specialist knowledge is required in particular:
■
The "Five safety rules": Disconnect from the mains; protect against accidental switch-on;
ensure there is no voltage; earth and short-circuit; cover or protect adjacent live parts
■
Use of suitable tools, measuring devices and personal protective equipment, where ne-
cessary
■
Analysis of measurement results
■
Use of electrical installation materials to meet the requirements for disconnection
■
IP protection ratings
■
Installation of electrical installation materials
■
Type of power supply (TN system, IT system, TT system) and the corresponding con-
nection criteria (classic earthing, protective earthing, necessary additional measures etc.)
If you are not a professional, do not do it yourself, have it performed by a specialist.
5.7 Drilling
When penetrating the surface (example: drilling or inserting fasteners), make
sure no cables or pipes are damaged. Inadvertently penetrating electric cables
causes the life-threatening danger of an electric shock! Check for concealed
wires and pipes before drilling or inserting fasteners.
5.8 Installation and maintenance
WARNING
Risk of electric shock!
Switch the power OFF and disconnect the power supply at the circuit
breaker before installation or maintenance.
Always ensure that electrical work is carried out by a qualified electrician
and in accordance with local regulations and standards.
5.9 Luminaire
■
Do not hang or fasten anything on the product (e.g. decorations).
■
Do not cover the product – provide free air circulation.
■
This luminaire may only be operated with a complete and intact protection glass.
■
In case of a malfunction you may NOT touch the product or operate it further. Disconnect
the product from the power supply by an external switch or by the fuse.
■
A malfunction exists when:
– There is visible damage.
– The product does not operate correctly (e.g. flickering).
– Smoke, steam, or crackling sounds appear.
– Overheating is apparent (e.g. discolouration of adjacent surfaces).
Advertenties
Inhoudsopgave
