Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
▪
Fastener driving tools shall only be connected
to an air-supply where the maximum allowable
pressure of the tool cannot be exceeded by
more than 10 %; in the case of higher pressu-
res, a pressure reducing valve which includes a
downstream safety valve shall be built into the
compressed air supply.
▪
Only spare parts specified by the manufacturer
or his authorized representative shall be used in
the repair of fastener driving tools.
▪
Repairs shall be carried out only by the manu-
facturers' authorized agents or by other experts,
having due regard to the information given in the
operating instructions.
NOTE
Experts are those who, as a result of professional trai-
ning or experience, have sufficient expertise in the
field of fastener driving tools and sufficient familiarity
with relevant government industrial protection pro-
visions, accident prevention regulations, directives,
and generally recognized technical regulations (e.g.
CEN and CENELEC-standards), to be able to assess
the safe condition of fastener driving tools.
▪
Stands for mounting the fastener driving tools to
a support, for example to a work table, shall be
designed and constructed by the stand manu-
facturer in such a way that the fastener driving
tools can be safely fixed for the intended use,
thus for example avoiding damage, distortion,
displacement.
Special fields of application for the fastener driving
tools may require the observance of additional provi-
sions and regulations (for example working in areas
subject to an explosion hazard).
8
GB/IE/NI
S afety of the fastener driving tool
Please read all the safety informa-
tion and instructions.
Failure to comply with the safety ins-
tructions and instructions can result
in severe injuries and/or damage to
property.
PLEASE RETAIN ALL SAFETY INFORMATION AND
INSTRUCTIONS FOR FUTURE REFERENCE!
▪
Each time before starting work, check for
flawless functioning of the safety and trigge-
ring devices as well as the firm fit of all bolts
and nuts.
▪
Do not conduct any improper manipulation
of the fastener driving tool.
▪
Do not dismount or block any part of the
fastener driving tool, such a trigger lock.
▪
Do not conduct any „emergency repairs"
with unsuitable materials.
▪
The fastener driving tool must be regularly
and properly maintained as specified by
the manufacturer.
▪
Prevent anything that would weaken or da-
mage the device, e.g. by:
– stamping or engraving,
– alterations not permitted by the manufacturer,
– guiding on templates made of hard material,
e.g. steel,
– permitting to fall onto or slide across the floor,
– using as a hammer,
– every type of external force.
Work safety
▪
Never point a fastener driving tool that
is ready to use directly at yourself, other
persons or animals.
▪
During work, hold the fastener driving tool
so that head and body can not be injured
by possible kickback due to a fault in the
power supply or from hard places in the
workpiece.
Advertenties
Hoofdstukken
Inhoudsopgave
