Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1. gMC-40 coupling
3. gMC-40 strap
Please read this manual carefully before
installation and use of the gMC-40.
Note
gAvilar warranty obligations do not apply in
case of malfunctions due to inexpert or
inappropriate use.
1. Introduction
The gMC-40 is a substitute of the BMA
04 and is therefore compatible with the
®
PLEXOR
* inspection system for
pressure regulating stations. The gMC-
40 shall be placed on the output side
of the pressure regulating station, at an
output pressure up to 100 bar. Use the
matching PLEXOR
for safe and easy connection to a
pressure regulating station.
Copyright © gAvilar B.V.
GA-02.115-NL/EN/DU-01.04.20
This controlled document is subject to change. For latest revision visit our website at
*PLEXOR is a registered trademark of Wigersma & Sikkema B.V.
Installation and operation of gAvilar
Measuring Coupling gMC-40 PN100
®
* connecting hose
2. gMC-40 cap
2. Safety measures
•
Work according to applicable
regulations and guidelines.
•
For the correct operation of the gMC-
40, the use of clean and condensate-
free natural gas (CNG) is necessary.
•
The user of the PLEXOR
system must be qualified in agreement
with the nationwide regulations to
perform the functional inspections on a
pressure regulating station.
•
Before using the device, the user must
have had a PLEXOR
system training.
•
A defective coupling must be replaced
with a new one. Please send the
defective coupling for analysis to
gAvilar B.V..
•
Adjusting the inner bolt can lead to
malfunctioning of the coupling and is
therefore strictly prohibited.
Product information: +31 85 4897 130
www.gavilar.nl
Instruction sheet
67031
Rev. c
®
* inspection
®
* inspection
info@gavilar.nl
3
Advertenties
Inhoudsopgave
