Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Assembly and Operating Instructions
WIND CONTROL
The wind threshold value is pre-set to 04.
The threshold value can be set from 01 (slight wind) to 11 (very windy). The new
setting to be made is shown on the display. The new wind setting field flashes.
If the wind setting has not been reached for a period of 15 minutes, control com-
mands may be executed again.
TEST mode
The TEST mode is activated by adjusting a threshold value. This is automatically
terminated after approx. 15 minutes, or immediately by actuating the sliding
switch. The times of the sunshade function and the wind control are reduced
in TEST mode.
Language selection (ENGLISH GB)
Your national language can be selected via this menu option.
SUMMER/WINTER
SUMMER/WINTER refers to the automatic clock adjustment for daylight sav-
ing changes. The factory setting is ON; the SWC545-II device adjusts the clock
automatically.
Function menu
This mode is intended for qualified staff only.
In the FUNCTION menu the following functions can be set:
- AWNING/VENETIAN BLINDS (select curtain/fabric)
- PROGRAM MODE
- OPERATING TIME
- SWITCHING TIME/BLOCKING TIME
- EXPERT MODE OFF/ON
- INITIAL OPERATION (for servicing purposes)
EXPERT MODE
In order to modify delay times in the SETTINGS menu the EXPERT MODE must
be ON.
36
Advertenties
Inhoudsopgave
