Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
MAINTENANCE
Active carbon filters:
The regenerable active carbon filter must be washed by hand with
neutral cleaning products, or in the dishwasher at a maximum
temperature of 65 °C (the washing should be done without any plates,
dishes, cups, etc. in the machine).
Remove the excess water without damaging the filter, remove the
holder and let the filter dry in the oven for at least 15 minutes at a
maximum temperature of 100 °C.
To keep the regenerable carbon filter efficient, this action should be
repeated every 2 months or when indicated by the filter indicator.
The filter must be replaced after no more than 3 years, or if it has
been damaged.
It is important that the grease filters and the regenerable active
carbon filter are thoroughly dry before repositioning.
Replacing the carbon filter:
The grease filters should first be removed before replacing the
carbon filter.
•
• Tilt the carbon filter downwards to remove it.
•
Operation:
•
• The carbon filter's operation is optimal at a lower motor speed.
Attention!
This hood is fitted with LED light! These have to be replaced by a
authorized technician. Do not attempt to replace LED light by yourself.
Press the two 'B' buttons on the carbon filter inwards.
Repeat the steps above in reverse order, to replace the carbon filter.
Using a carbon filter creates more sound than when using the
cooker hood with an outlet.
You should, therefore, avoid using the boost function.
EN 11
Advertenties
Hoofdstukken
Inhoudsopgave
