Operation - Amica 2022C2.334eEHiTsDX Gebruikershandleiding
Verberg thumbnails
Zie ook voor 2022C2.334eEHiTsDX:
- Gebruikershandleiding (144 pagina's) ,
- Gebruikershandleiding (144 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Before using the oven for the first time
Remove packaging, clean the interior of
the oven and the hob.
Take out and wash the oven fittings with
warm water and a little washing–up liq-
uid.
Switch on the ventillation in the room or
open a window.
Heat the oven (to a temperature of 250°C,
for approx. 30 min.), remove any stains
and wash carefully; the heating zones
of the hob should be heated for around
4 min. without a pan.
Important!
In ovens equipped with the electronic
programmer Ts, the time "0.00" will
start flashing in the display field upon
connection to the power supply.
The programmer should be set with
the current time. (See Electronic
programmer ). If the current time
is not set operation of the oven is
impossible.
The electronic prgrammer Ts is
equipped with electronic sensors which
are switched on by touching or press-
ing the sensor surface for at least one
second.
Each sensor reaction is confirmed by
the beep.Keep the sensor surface clean
at all times.
Important!
To clean the oven, only use a cloth
well rang out with warm water to
which a little washing-up liquid has
been added.
18
Advertenties
Hoofdstukken
Inhoudsopgave
