Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
CONTROLS
Appliance controls
The control panel is shown in figure 10. For reference it is also shown
below:
START
1. Clean the parts of the refrigerator with lukewarm water containing a little neutral detergent and with
clear water, and wipe them dry.
Notes: Electric parts of the refrigerator can only be wiped by dry cloth.
2. Turn on electricity. The compressor begin to work.
3. Open the door 30 minutes later, if the temperature in the refrigerator decreased obviously, it shows
that the refrigerator system works well. When the refrigerator operates for a period of time, the temper-
ature controller will automatically set the temperature within limits it opens.
The display is located in the middle of the refrigerator door. Please refer to the below figure for the
layout.
INTRODUCTION OF THE BUTTONS
1 Fridge: to set the refrigerator temperature
2 Freezer: to set the freezer temperature
3 Function: to choose functions of fast cooling, fast freezing, SmartECO and vacation
4 OK: to enter or to quit the existing function Function setting
Appliance connected to power at the first time
When the appliance is connected to power at the first time, the display will be lit for 2 seconds before
going normal and the appliance runs with SmartECO function.
- 17 -
Advertenties
Inhoudsopgave
