Download Print deze pagina

ULTIMATE SPEED UMAP 12000 C3 Bedieningshandleiding pagina 20

Advertenties

Beschikbare talen

Beschikbare talen

Actuate the activation key for the LED-lamp
in order to turn off the LED lamp
Flash mode
To turn on the LED lamp
the activation button for the LED lamp
initially is lit permanently.
Pushing the activation button for the LED lamp
briefly will cause the LED lamp to switch to flashing mode.
Pushing the activation button for the LED lamp
briefly will cause the LED lamp
will give 3 short, 3 long, and 3 short flashes.
Pushing the activation button for the LED lamp
switch off the LED lamp
ATTENTION: Do not look directly at the LED lights
this can damage your eyes.
PLEASE NOTE: It is not possible to turn on the light while
the portable jump starter with power bank
z FAQs
Q: How can I switch the device off?
A: The device automatically switches off after 20 seconds of non
use. There is no provision for switching it off manually.
Q: How long does it take to fully charge a mobile
phone with the device?
A: With a charge level of 2500 mAh:
Approx. 2–3 hours if connected to the USB output
5V
/1A
USB output 5V
switched on, it will continually use battery power while
actually charging and this can extend the charging time.
Q: How long does the device's rechargeable battery
pack last?
A: 3–6 months. However, we recommend charging the recharge-
able battery pack every 1–2 months.
20
GB/IE/NI
in flashing or SOS mode, push
2
.
2
. Approx. 1–2 hours if connected to the
5
/2A
. Please note that if the device is
6
2a
again.
2
. The LED lamp
2a
to switch to SOS mode. It
2
is being charged.
1
3 times again
2
again
2a
again
2a
again will
2a
as
2

Advertenties

loading

Gerelateerde Producten voor ULTIMATE SPEED UMAP 12000 C3