Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
10. Operation
a) Connecting the power adapter and IR receiver
32
• Connect all necessary cables (e.g. video, antenna,
and power cables) to your TV/monitor. To protect the
cables, guide them through the cable conduit (K).
• Ensure that there is enough slack in the cable so that
the ceiling mount and the TV/monitor can move freely
without the cable becoming trapped.
• Use the cable ties to hold the cables in place. Once
you have connected all of the cables, attach the
decorative covers (D) to each side of the mount.
• Mount the IR receiver (G) in a suitable location within direct sight of the
remote control.
• Find a suitable place to run the power cable (I) (approx. 1.2 m long) and
the IR receiver cable (approx. 2 m long) and stick the adhesive cable clips
(L) to a clean and strong surface.
• Connect the cable on the IR receiver to the connection socket (1) on the
ceiling mount's motor unit.
• Connect the low voltage cable on the power adapter to the low voltage
socket (2) on the ceiling mount's motor unit.
• The LED indicator (3) turns on.
• Connect the power adapter to a mains socket.
Advertenties
Hoofdstukken
Inhoudsopgave
