Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Attaching the kneepad
The kneepad is attached to the knee using hook and loop
fasteners so that the kneeling area is covered. The top edge of
the kneepad should protrude past the bent knee by 2cm.
The kneepad can be worn over clothes or be attached directly
over skin.
Attention!
Ensure the hook and loop fasteners are not too tight. Do not al-
low the hook and loop fasteners to cross the hollow of the knee.
This could impair blood circulation.
Suitable for persons with a waist measurement up to 100cm!
Finally, check that the kneepad is comfortably positioned and
sufficiently tightened for the work to be carried out.
Maintenance and care
General
Inspect the kneepads for damage prior to every use. If the
kneepads are damaged, for example torn, broken or parts are
partially loosened, they are no longer usable and should not be
worn. Do not tamper with this product, as the protective proper-
ties can no longer be guaranteed. Severe soiling, alterations or
improper use may impair the performance of these knee protec-
tors in a hazardous way.
The kneepads mainly consist of PVC, polyester, SBR and PE
foam.
Cleaning
Rough dirt can be removed from your kneepads by brushing.
Stubborn dirt can be removed by hand washing in lukewarm
water or with a neutral detergent solution. Rinse with clean water.
Never wash the kneepads with solvent-based or harsh cleaning
agents. Never machine wash, tumble dry or iron.
GB
23
Advertenties
Inhoudsopgave
