Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
An installation kit is included in the packaging. Follow the instructions below:
1. Select the appropriate place on the wall.
2. Place the mounting template on the wall, making small marks where the holes are to be
located.
3. Remove the mounting template and drill holes in the wall.
4. Insert the plugs into the holes made.
5. Screw the four metal anchoring pieces to the wall with the 6.3 x 50 mm screws.
6. Screw the four fastening cylinders to the product as shown in Figure 1.
7. Insert the product-plus-cylinder assembly from item 6 into the metal wall anchoring parts
and fasten with the 2.9 x 9.5 mm grub screw.
1
10 mm rawl plug
2
Metal fastener
3
Screw Ø 2.9 x 9.5 mm
4
Screw Ø 6.3 x 50 mm
5
Metallic cylinder
6
Product
INSTALLATION AND SAFETY PRECAUTIONS (UNE-EN 60335 REGULA-
TION)
Before starting the heater, read the "Installation and Safety Precautions" carefully to ensure
proper operation of the heater.
PRECAUTIONS FOR INSTALLATION
The towel rail is designed for domestic or residential use. We recommend that the towel
rail is installed by a distributor or an approved professional. Make sure that the heater is
correctly connected to 220V-230V.
This appliance has been designed for installation in a residential room. The installation
OCEAN WI-FI ELECTRIC TOWEL RAIL
6
5
4
3
2
1
5
EN
11
Advertenties
Hoofdstukken
Inhoudsopgave
