Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
9)
Turn off all switches and unplug the heater if an emergency situation occurs.
10) Please contact with seller if it does not work properly. Do not try to repair the heater by yourself.
11) Please contact the seller if you find other problems not covered in this operation manual.
12) Cleaning and user maintenance shall not be made by children with supervision.
TECHNISCHE SPECIFICATIES
SPECIFICATION
Model:
Feature:
Voltage:
Model:
THL001-MI
Feature:
Rocker Switch
Power:
Voltage:
220-240V~50-60Hz
Weight:
Power:
0/750/1500W
Size:
Weight:
6.3 kg
Size:
42.5*80 cm
Onderdelen
Beschrijving
Parts
Description
A
Heater HEAD
A
Heater Head
B
B
Pole
C
C
Base
D
Tapping Screw
D
Tapping Screw
E
Cable
E
F
Cable Clip
F
Cable Clip
INSTALLATION
INSTALLATION
Please check all the items against the parts list after opening the box. Only all the items are
Please check all the items against the parts list after opening the box. Only all the items are complete, the
complete, the installation could be followed.
installation could be followed.
1
5
Operation
OPERATION
• Ensure the unit is plugged into the correct power supply.
-
• To activate the "750W" heat setting press the switch marked '-' only.
O
• To activate the "1500W" setting press the switch marked '=' only.
=
• To turn the unit OFF completely press the switch marked 'O'.
"
" for 1500W
21020
Rocker Switch
220-240V~50-60Hz
0/750/1500W
6.3 kg
42*78 cm
Aantal
Quantity
1
1
Pole
1
1
Base
1
1
2
2
1
Cable
1
1
1
Cable
Plug
2
1) Install the pole on the base.
1. Install the pole on the base.
2) Feed the cable through the pole from bottom.
2. Feed the cable through the pole from bottom.
3) Connect the cable with heater head. Then use the cable clip fix the
3. Connect the cable with heater head. Then use the cable clip fix
the connection. The arrow on the clip should point the heater
connection. The arrow on the clip should point the heater head.
head.
4) Put the heater head into the pole and fix it by 2 tapping screw s.
4. Put the heater head into the pole and fix it by 2 tapping screws.
5) Secure the power cord to the weighted base.
5. Secure the power cord to the weighted base.
D
A
E
F
A
B
B
x2
D
E
C
C
F
3
"
" heater OFF
2
4
Advertenties
Inhoudsopgave
