Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
This adjustment set is intended exclusively for setting and commissioning
Becker SMI tubular drives with electronic limit switching. Please observe the
Assembly and Operating Instructions for the respective tubular drive. After
commissioning, the adjustment set must be removed and replaced with a per-
manently installed operator control.
General information
• Only use in dry rooms.
• Only use unmodified original parts from the control unit manufacturer.
• Keep children away from control units.
• Observe all pertinent country-specific regulations.
Caution
•
Risk of injury due to electric shock.
•
Connections to the 230 V mains must always be per-
formed by an authorised specialist.
•
Disconnect the connecting cable from the power supply
prior to assembly.
•
Always comply with the regulations of local energy supply
companies as well as the VDE 100 provisions for wet and
damp rooms during installation.
•
Never use faulty or damaged devices.
Intended use
Safety instructions
9 - en
Advertenties
Hoofdstukken
Inhoudsopgave
