MAINTENANCE
Grease filters
Carbon filters
1. Slide the visor out until it stops.
2. Push in the handle of the filter and remove the grease filter.
Use a carbon filter if the cooker hood is not connected to an exhaust
duct.
Centre the carbon filter on the motor frame and turn it to mount it to the
motor frame.
Important:
The regenerable active carbon filters can be washed by hand or in the
dishwasher at a maximum temperature of 65 °C. The washing cycle
must be done without other dishes and without dishwasher detergent.
Do not use any cleaning agents!
Remove excess water. Be careful to avoid damaging the filter. Place the
filter in the oven to dry for at least 1 hour at a maximum temperature of
80 °C. After up to 3 years (or if the filtres are damaged), the filters will
need to be replaced.
It is important that the grease filters and the regenerable active
carbon filters are properly dried before installation.
EN 9