Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
USE
Filters cleaning indication
The hood is equipped with a function that warns the user at regular
intervals when the filters are saturated.
Grease filter indicator lights
All indicator lights of the speed buttons come on when the extractor
hood is switched off; the grease filters must be cleaned (see chapter
'Maintenance').
• To reset the cleaning indicator, you must press speed button 2 for
at least two seconds when the extractor hood is switched off.
Charcoal filter indicator lights
All indicator lights of the speed buttons flash when the extractor
hood is switched off; the carbon filters must be replaced (see chapter
'Maintenance').
• To reset the cleaning indicator, you must press speed button 2 for
at least two seconds when the extractor hood is switched off.
Activation of the carbon filter cleaning indicator
In standard mode, the carbon filter cleaning indicator is not active.
If the cooker hood is used as a recirculation hood, the carbon filter
cleaning indicator must be activated.
1. Switch off the extractor hood and the lighting.
2. Press and hold speed button 2 and speed button 3
for at least three seconds.
▷ The indicator lights will flash to confirm.
Switching off the carbon filter cleaning indicator
1. Switch off the extractor hood and the lighting.
2. Press and hold speed button 2 and speed button 3
for at least three seconds.
▷ The indicator lights will come on to confirm.
simultaneously
+
simultaneously
+
EN 7
Advertenties
Hoofdstukken
Inhoudsopgave
