c) Switching the light on/off
• Press the on/off button (5) to turn the light on. By
• Press the on/off button again to switch to 'Bright' mode.
• To turn the light off, press the on/off button three times
d) Magnetic holder
The magnetic holder (3) allows you to attach the light to
magnetic surfaces (e.g. between machines to illuminate
areas that are difficult to access).
e) Fold-out stand/handle
You can swivel the fold-out stand/handle (11) by 180° to
secure the light in place or make it easier to hold.
180°
f) Hook
Adjust the hook (10) to the desired position to hang the
light in place and illuminate your work area.
g) Belt clip
Use the belt clip (9) to attach the light to your belt and
keep it within easy reach.
h) Storage and transport
• Close the cover (6) when not using the product or when transporting it.
• The cover must be fully inserted into the micro USB port. Ensure that there is a good seal and
that there is no dirt trapped underneath the cover.
Care and cleaning
• Use a dry, lint-free cloth to clean the product. The cloth can be moistened slightly if necessary.
• Do not clean the product by immersing it in water.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could
damage the casing or cause the product to malfunction.
default, the light switches on in 'Eco' mode.
in quick succession.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in household
waste. Always dispose of the product according to the relevant statutory regulations.
b) Rechargeable batteries
You are required by law to return all used batteries. They must not be placed in
household waste.
Rechargeable batteries that contain hazardous substances are labelled with this
symbol to indicate that disposal in household waste is forbidden. The abbreviations
for heavy metals in batteries are: Cd = Cadmium, Hg = Mercury, Pb = Lead (indicated
on the battery, e.g. below the waste icon on the left). Used rechargeable batteries
can be returned to local collection points, our stores or battery retailers.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Rechargeable battery ................... 3.7 V, 1000 mAh lithium-ion rechargeable battery
(not replaceable)
Charging time ............................... Approx. 2.5 hours (depending on the battery status)
Charging cycles ............................ Approx. 500
Protection rating ........................... IP52
Battery life ..................................... When fully charged: 6 Hours ('Eco' mode),
> 3 hours ('Bright' mode)
Illuminant ...................................... 1x COB (bare chip)
Luminous flux ............................... Max. 120 lm ('Bright' mode)
Beam angle .................................. 120°
Beam range .................................. 12 m
Operating/storage conditions ........ 0 to +40 °C, 0 – 100 % relative humidity (non-condensing)
Dimensions (L x W x H) ................ 25 x 50 x 117 mm
Weight .......................................... Approx. 115 g
Distributed by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method (e.g. photocopying, microfilming, or the capture in electronic data processing systems)
requires prior written approval from the editor. Reprinting, also in part, is prohibited. These operating instructions reflect the
current technical specifications at the time of printing.
Copyright 2017 by CEI Conrad Electronic International (HK) Limited
*1507465_v2_1217_02_DS_m_4L_(1)