Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operating instructions
Rechargeable work light, 1000 mAh, 120 lm
Item no. 1507465
Intended use
This rechargeable work light is designed for a wide variety of applications, e.g. vehicle
inspections/repairs and workshops. It is splash- and dustproof and can be clipped to your belt
or hung on a wall using the fold-out hook. The IP52 protection rating is only guaranteed when
the cover is attached to the USB charging port. The light comes with a 180º fold-out stand
and a built-in magnet that attaches itself to magnetic surfaces. Power is provided by a built-in
lithium-ion rechargeable battery, which can be charged using the USB cable provided and a
standard USB power source.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as short circuits or fire. Read the instructions carefully
and store them in a safe place. Make this product available to third parties only together with
its operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Rechargeable work light
• Micro USB cable (1 m)
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle indicates that there is a risk to your
health, e.g. due to an electric shock.
This symbol is used to highlight important information in these operating instructions.
Always read this information carefully.
This symbol indicates special information and advice on how to use the product.
Safety information
Read the operating instructions and safety information carefully. If you do
not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to
property. Such cases will invalidate the warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly, as it may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe the safety and operating instructions of any other devices which
are connected to the product.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or an
authorized repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Rechargeable battery
• Never attempt to damage the rechargeable battery. Damaging the casing of a
rechargeable battery may cause it to explode or catch fire!
• Never short-circuit the contacts of the rechargeable battery. Do not throw the
battery or the product into open flames. This constitutes a fire hazard and may
cause an explosion!
• Charge the battery regularly, even when you are not using the product. You do not
need to discharge the battery before recharging it.
• Never leave the battery unattended when it is charging.
• When charging the battery, place the product on a heat-resistant surface. The
product may become warm when the battery is charging.
c) Persons and product
• Warning, LED light:
- Do not look directly at the LED light!
- Do not look into the beam directly or with optical instruments!
• Never use the product immediately after it has been brought from a cold room
into a warm one. The condensation generated may destroy the product. Allow the
product to reach room temperature before connecting it and putting it to use. This
may take several hours.
• Never expose the product to water or damp environments when the cover (6) for
the USB charging port is not in place.
Product overview
5
6
7
4
8
9
10
11
2
3
1
Operation
a) Charging the battery
• Charge the battery when the battery is empty or when
• Pull the plastic cover (6) off the micro USB port.
• Insert the micro USB connector (1) on the charging
• Connect the USB-A connector (2) on the micro USB
• The LED battery level indicator will turn green when the
b) Overload, overcurrent and overvoltage protection
• For safety reasons and to protect the battery, the battery will not charge when the light is
connected to a non-standard USB power source. The LED battery level indicator (8) will not
turn on.
• Disconnect the light from the USB power source and charge the battery using a standard
USB power source.
1 Micro USB connector
2 USB-A connector
3 Magnetic holder
4 LED
5 On/off button
6 Cover
7 Micro USB port
8 LED battery level indicator
9 Belt clip
10 Hook
11 Fold-out stand/handle
you notice a significant drop in brightness.
cable into the micro USB port (7) on the light.
cable to a USB port on a computer or other suitable
USB power source (e.g. USB power adapter). Charging
will start automatically when the USB power source
delivers a current. The LED battery level indicator (8)
will turn red to indicate that the battery is charging.
battery is fully charged.
Advertenties
Inhoudsopgave
