Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
10
converting to another type of gas
Your stove is deliverd from the factory with a natural gas connection. Check this on the rating label. If you want to use the stove
with another type of gas, the stove can be converted to LPG (propane). This must be done by a qualified installer according to the
following instructions and with the supllied nozzles.
• Remove the burner caps and burners.
• Use a driver with a special head ( a hexagonal screwdriver - nr. 7) to remove the nozzle.
• Remove the nozzle and place the new nozzle for LPG. Attention: use the correct nozzle for the right burner.
After installing the new nozzles, you must change the capacity of the flame. If this is not done the burners will not burn correctly.
• Carefully pull of the control knobs.
• Turn with a small screwdriver on the screw in the middle of the gas cock according to the table below.Repeat this for each gas
control knob.
• Press the control knobs back on the stove.
Simmer burner
Semi-rapid burner
Rapid burner
G25/25 mbar
(kW)
1
0,88
2
1,61
3
3,00
28
•
English
VFG6012-instructions.indd 28
From natural gas to LPG
2 turns clockwise
2,5 turns clockwise
3 turns clockwise
LPG G31
(kW)
0,88
1 Simmer burner
1,78
2 Semi-rapid burner
3,00
3 Rapid burner
From LPG to natural gas
2 turns counterclockwise
2,5 turns counterclockwise
3 turns counterclockwise
19-12-2014 13:35:59
Advertenties
Inhoudsopgave
