Download Inhoudsopgave Inhoud Print deze pagina

Maintenance; Cleaning - Pelgrim DSG881 Series Handleiding

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

MAINTENANCE

Cleaning

EN 8
Attention! Before carrying out maintenance work, always disconnect
the cooker hood from the power supply by pulling out the plug or
switching off the power at the fuse box. The hood must be cleaned
regularly, both inside as well as outside (with at least the same regularity
as used for cleaning the grease filters). Do not use any products that
contain abrasive materials. Do not clean with alcohol!
Attention! If you do not follow these instructions with regards to the
cleaning of the appliance and the cleaning or replacement of the filters,
this can lead to fire. It is essential to follow these instructions!
The manufacturer is not liable for damage to the motor or damage as a
result of fire that is due to improper servicing or not following the above
safety requirements.
Cooker hood
Clean the cooker hood with soapy water and a soft cloth. Then treat
with clean water. Do not use any aggressive cleaning agents such as
soda. The lacquer of the cooker hood will remain in good condition if
you rub the lacquer with wax once in a while.
Stainless steel hoods
Do not use scouring sponges or other abrasives on stainless steel
hoods. Finish with a non-abrasive, non-polishing agent and scrub in the
direction of the brushing of the stainless steel.
Metal grease filters
Metal grease filters should be cleaned once a month (or when indicated
by the filter saturation indication system, if present on your model),
using a neutral cleaning agent, preferably by hand or in the dishwasher
on a short, low-temperature program. Place the grease filters with the
openings facing downwards in the dishwasher so the water can drain
out of the filter. Aluminum-colored and black grease filters become dull
as a result of dishwasher cleaning agents. This is normal and does not
effect the working.

Advertenties

Inhoudsopgave
loading

Inhoudsopgave