Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
USE
Operation
Saturated grease filters
EN 6
Switching the fan on and off
1. Switch the fan on by touching the On/Off key.
2. Select the required extractor speed by touching the speed keys or
one of the Intensive speed keys.
• Intensive speed 1 will automatically switch back to the most
recently set extractor speed after 8 minutes.
• Intensive speed 2 will automatically switch back to the most
recently set extractor speed after 7 minutes.
3. Switch the fan Off by touching the On/Off key.
Switching the lighting on and off
1. Touch the light key.
▷ The lighting come on.
2. Touch the light key again.
▷ The lighting goes off.
After 4 hours of not operating the cooker hood will switch itself off
automatically.
When starting extraction the grease filter saturation indicator lights up
for 5 seconds in a colour that indicates the level of filter saturation:
• Green: 0-75% saturation
• Oranje: 76-99% saturation
• Red: Grease filter has to be cleaned (see chapter 'Maintenance')
Reset when the indicator is red
1. The extractor hood is on (the motor is running).
2. Touch the 'grease filter saturation' key; the saturation indicator
switches off and an audio signal sounds.
Do not reset the memory until the maintenance work on the filters
has been completed.
Advertenties
Hoofdstukken
Inhoudsopgave
