Advertenties
Beschikbare talen
Beschikbare talen
b) (Rechargeable) batteries
Remove batteries/rechargeable batteries, if any, and dispose of them separately from the product. According to the
Battery Directive, end users are legally obliged to return all spent batteries/rechargeable batteries; they must not be
disposed
of
Batteries/rechargeable batteries containing hazardous substances are labelled with this symbol to indicate
that disposal in household waste is forbidden. The abbreviations for heavy metals in batteries are: Cd =
Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable) batteries, e.g. below the trash icon on the
left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our stores or wherever (re-
chargeable) batteries are sold. You thus fulfil your statutory obligations and contribute to environmental protection.
Batteries/rechargeable batteries that are disposed of should be protected against short circuit and their exposed ter-
minals should be covered completely with insulating tape before disposal. Even empty batteries/rechargeable batter-
ies can contain residual energy that may cause them to swell, burst, catch fire or explode in the event of a short circuit.
13. Troubleshooting
The multimeter was designed using the latest technology and is safe to use.
However, problems and malfunctions may still occur.
This section tells you how to troubleshoot common issues:
Always observe the safety information in these instructions.
Error
The multimeter
does not function
The measured
value does not
change.
Any repair work other than that described above must be carried out by an authorized technician.
If you have questions about the multimeter, please contact our technical support team.
52
in
Possible cause
Are the batteries empty?
Have you selected the wrong measurement
mode (AC/DC)?
Are the measuring leads plugged into the
measuring sockets correctly?
Is the hold function enabled ("HOLD")?
the
normal
Solution
Check the status. Replace the batteries.
Check the display (AC/DC) and select
another mode if necessary.
Check that the measuring leads are in the
correct position.
Press the "HOLD" button to disable this
function.
household
waste.
Advertenties
