Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ASSEMBLY INSTRUCTION
•
Open the packing, take the unit out and unscrew the cover fixer.
body
cover fixer
•
Insert the glass base into the bottom
of the unit, screw the cover fixer.
PARTS DESCRIPTION
Front view
Control panel
Air outlet
Logo bar
Glass base
20
Solis_DecoHeaterPlus_Betriebsanleitung.indd 20-21
body
base
cover fixer
• Upright the unit and place it
on the flat floor before use.
Back view
Handle
Back cover
Air filter
Power cord
OPERATING INSTRUCTION
Firstly, connect the power cord to the correct power supply.
Power switch (at the bottom of rear cover under the removable air filter)
Press the power button to "I" position. If you heard the sound of "didi",
the heater is ready to use. Press the button to «0» position for turning off
Low
High
the heater.
ON/OFF key
Press the«
» key, the power indicating light will be turned on, the machine starts operation at low
heating power (LED indicator of the heating function shows « LOW »). Press the key again, then all the
SET
functions are stopped and the unit goes into the condition of standby mode and the power indicating
light will be turned off.
HEATER key
When the product is operated at low heating power, press the «
be turned on, and the LED indicator will show «HIGH». Pressing this key controls the selection of the low
Low
High
heating power or the high heating power.
SWING key (Oscillation)
When the unit is under operating, press the «
» key, the heater body will turn left and right automatically.
At the same time, the LED indicator of this swing function will be turned on. Press this key again, the
Low
SET
swing function will be stopped, and the LED light will be turned off..
SET key
When the unit is under operating, pressing the «
A: set the timer:
press the key, the the light will show "0 H", then press the «+» or «-» key, to set the working time (within
a range of 1-12 hours). The time will be added or minus by 1 hour per every press of the «+» or «-» key, at
the same time, the displaying light will show the time you set.
Notice: when press the set key, the LED light will flicker per 0.5 second for 5 seconds. If there is no operation
to the keys after 5 seconds, or press other keys except the «
Low
will show the room temperature.
Set the temperature:
When the timing setting finished, press the «
SET
you can set the temperature. Press the «+», «-» key, to set the temperature (within a range of 15-35° C).
The temperature will be added or minus by 10° C per every press of the «+» or «-» key, at the same time,
the LED indicator will show the temperature you set.
Notice: when press the set key, the LED light will flicker per 0.5 second for 5 seconds. If there is no
operation to the keys after 5 seconds, or press other keys except the «
indicator will show the room temperature. When the room temperature is ≤-10° C, the LED indicator
will show as «LO», when the room temperature is 40° C, the LED indicator will show as «HI». When
the room temperature is between -10° C to 40° C, then the LED indicator will show the corresponding
temperature by number.
N.B.
When the temperature set is reached, the unit goes in stand-by mode, the power level indication
disappears and air circulation stops after 10 seconds. When the ambient temperature is 2° C below
the set temperature, the unit begins operating again at the same power level previously set.
Low
High
SET
Control Panel and
display window
High
Low
» key, the high heating power will
SET
High
» key to set the temperature or time.
SET
High
Low
High
» , «+», «-» key, then the LED indicator
SET
» again, then the LED light will show 25° C, and now
High
Low
», «+» or «-» key, then the LED
SET
21
21.06.10 09:48
Advertenties
Inhoudsopgave
