ENGLISH
OPERATION MANUAL
FEATURES
• 8 times over sampling 1 bit D/A converter.
• Pitch ranges: +/-8% +/-12% +/-16%
• Pitch bend on jog wheel and buttons for perfect mixes
• Fader start/stop (back cue)
• Auto cue function(-48dB)
• 1/75 Frame search
• 4 different speed scan
• Selectable elapsed, remain and total remain time display
• Pitch display.
• Single/continuous play
• Relay play allows consecutive playback on two decks
• S/PDIF digital output (RCA/cinch)
• 60 seconds Transport Protection
• 20 tracks program play
BEFORE USE
Check the contents:
Check that the carton contains the following items:
• Main unit
• Control unit
Operating instructions
•
• Pair of cinch cords
• 1 mini-DIN8 cable
• Pair mono 3.5mm jack cables for fader starts
JB SYSTEMS®
USER MANUAL
1/48
CD570
ENGLISH
CAUTIONS REGARDING HANDLING
SAFETY INSTRUCTIONS:
CAUTION: To reduce the risk of electric
CAUTION
shock, do not remove any cover. No user-
serviceable parts inside. Refer servicing to
qualified service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is
intended to alert the use or the presence of un-insulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the
user to the presence of important operation and maintenance (servicing)
instructions in the literature accompanying this appliance.
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
Do not place metal objects or spill liquid inside the unit. Electric shock or malfunction
may result.
INSTALLATION GUIDELINES:
• Placing and using the unit for long periods near heat-generating sources such as
amplifiers, spotlights, etc. will affect its performance and may even damage the
unit.
• Take care to minimize shocks and vibrations during transport.
• When installed in a booth or flight case, please make sure to have good ventilation
to improve heat evacuation of the unit.
• To avoid condensation to be formed inside, allow the unit to adapt to the
surrounding temperatures when bringing it into a warm room after transport.
Condense sometimes prevents the unit from working at full performance.
• Choose the place where you put your installation very carefully. Avoid presence of
heat sources. Avoid places with vibrations or places that are dusty and humid.
• The player will work normally when installed on a surface with max. 15° inclination.
• Be very careful while handling CDs, do not touch them with wet or dirty hands.
• Discs that are dirty must be cleaned with special designed cloth and cleaning
products.
• Do not use CDs that are badly damaged (scratched or deformed) they can damage
your appliance.
• To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
• In order to prevent electric shock, do not open the top cover. If a problem occurs,
contact your dealer.
• Do not place metal objects or spill liquid inside the CD player. Electric shock or
malfunction may result.
• This CD player uses the semiconductor laser. To allow you to enjoy music at a
stable operation, it is recommended to use this in a room of 5°C – 35°C.
• The compact disc player should not be adjusted or repaired by anyone except
properly qualified service personnel.
• This unit may cause interference to radio and television reception.
JB SYSTEMS®
USER MANUAL
2/48
CD570