Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
LOFT 54F01003C
4. Assembling the bed
Step 4.1 : Use both headboards P1, four legs P4 and eight bolts E. Use both sides with bars P2 and eight cylindrical nuts
C. Use the assembled parts of this step, eight bolts D and the four eye pins
H.
Place the feet (P4) on the provided drillings on the headboards (P1). Push two bolts (E) into the holes of each leg and
fasten them into the nuts of the headboards. Push two cylindrical nuts (C) into the drillings at the top and bottom of the
ends of both sides with bars (P2). Place a headboard with its drillings on the holes of the sides with bars. Push four bolts
(D) in the drillings on the headboard and tighten in the nuts of the sides with bars. Repeat with the other headboard. Push
the eye pins (H) into the drillings of the headboards. Attention : use holes at the same height.
Quax nv Karel Picquélaan 84 B-9800 Deinze Belgium T
T
0032 9 380 80 95
www.quax.eu - E
E
info@quax.eu
29
Advertenties
Inhoudsopgave
