Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ELECTRICAL CONNECTION
Check that the voltage in your home corresponds with the voltage printed on the appliance.
These groups in the meter must be secured with at least 16 amps each. The connection cable must have a cross-section of at least
2.5mm² and must have a length of at least 1.5 m. When the cable is too short, you have no room to already connect the oven and place
it against the wall before plugging it in.
THE FITTING OF THE APPLIANCE
• Check that the cabinet and the space for the microwave meet the dimension and ventilation requirements.
• Read the instructions on the enclosed template for the bottom of the cabinet.
• Tape the template on the bottom of the cabinet. Make sure the centre line on the template is also the centre of the cabinet.
Screw A
Bracket
Centre line
• Place the bracket on the assigned spot on the template and mount it with the screws. Now pull the template from the bracket.
Screws
Bracket
• Slide the microwave in the cabinet. Check whether the microwave locks on to the bracket. Note: Make sure the cable is not stuck
and does not lie on top of the microwave.
bracket
English
•
25
Advertenties
Inhoudsopgave
