Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Hydraulic oil filter
The filter should be replaced twice a year.
•
Lay the power pack down with the filter housing facing
upwards.
•
Remove the cover of the filter housing by removing
the three screws.
•
Lift up the filter element.
•
Push the new filter in place over the sleeve coupling in
the bottom of the filter housing.
•
Mount the filter housing cover.
Tightening torque
When performing repair and maintenance work that
include demounting and subsequent mounting and
tightening of screws, the following torque should be used:
•
M6: 10 Nm
•
M8: 25 Nm
•
M10: 50 Nm
Daily maintenance
Regularly check:
•
The hydraulic oil level in the hydraulic power unit, to
make sure it lies between the marks on the sight
gauge.
•
Check the tyre pressures.
•
Any abnormal noises.
54 – English
MAINTENANCE
Advertenties
Hoofdstukken
Inhoudsopgave
