Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Hanging/Setting up
Use the hook (7) to hang the product only.
• The product can be hung up using the hook. Fold open the
hook (see illustration at right). Hook the smaller side of the
hook under the handle (1) and hang the larger side of the
hook on a tent pole, etc. Both ends of the hook rotate 360°.
• Remove the lamp shade (2) and use the base hook (6) to
hang the product. To do so, fold open the base hook from
its attachment and hang up the product upside down.
• To set up the light, carefully fold the base hook back to its original position. Place the product
on a horizontal, stable surface.
Using the camping lantern
• Press and hold the on/off button (3) to switch the product to lighting mode 1. The battery
indicator lights up briefly to show the battery charge state.
• Repeatedly and quickly press the on/off switch (within 2 seconds) to switch between the
product's modes: lighting mode 1 (neutral white) > lighting mode 2 (cold white) > lighting
mode 3 (warm white) > flickering mode
• Press and hold the on/off button in lighting mode 1, 2 or 3 to dim. Brightness is reduced.
Release the on/off button when the desired brightness is reached.
The light flashes briefly when the lowest brightness is reached. Then the product
returns to the highest brightness.
The light cannot be dimmed in flicker mode.
• Briefly press the on/off button. The light goes out.
• Turn the lamp shade (2) counter clockwise to remove it for a wider beam. You can set up the
product or hang it using the base hook (see section "Hanging/Setting up").
Cleaning and care
• Never submerge the product in water.
• Remove the batteries before cleaning.
• Under no circumstances use aggressive cleanings agents, cleaning alcohol or other chemical
solutions since these can penetrate the housing or impair functionality.
• Use a dry, soft cloth for cleaning the product.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines.
Remove any inserted batteries and dispose of them separately from the product.
b) Batteries
You as the end user are required by law (Battery Ordinance) to return all used
batteries. Disposing of them in the household waste is prohibited.
Contaminated batteries are labeled with this symbol to indicate that disposal in the
domestic waste is forbidden. The designations for the heavy metals involved are: Cd
= Cadmium, Hg = Mercury, Pb = Lead (name on batteries, e.g. below the trash icon
on the left).
Used batteries can be returned to collection points in your municipality, our stores or wherever
batteries are sold.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical data
Power supply ................................6 x 1.5 V batteries, type AA
Power consumption ......................max. 3.3 W
Operating time ..............................lighting mode 1 (neutral white)
lighting mode 2 (cold white)
lighting mode 3 (warm white)
flickering mode
Illuminants ....................................total 8 (non-replaceable):
4 x cold white LEDs, 4 x warm white LEDs
Luminous flux ...............................lighting mode 1 (neutral white)
lighting mode 2 (cold white)
lighting mode 3 (warm white)
Beam angle ..................................360 º
Protection type ..............................IPx4
Operating conditions .....................-10 to +80 °C, 30 - 85 % relative humidity
Storage conditions ........................-10 to +40 °C, 30 - 85 % relative humidity
Dimensions (ø x H) .......................7.5 x 16 cm
Weight ..........................................260 g
14 - 110 hours
24 - 140 hours
28 - 150 hours
90 hours
60 - 380 lm
40 - 230 lm
30 - 160 lm
Distributed by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require
the prior written approval by the editor. Reprinting, also in part, is prohibited. The operating instructions reflect the current
technical specifications at time of print.
© Copyright 2016 by CEI Conrad Electronic International (HK) Limited
*1499882_V1_1216_02_LS_m_en
Advertenties
Inhoudsopgave
