Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
8 RECORD SETTING
8.1 HDD management
After installing HDD, boot up the DVR, go to<Main menu>-<Advanced>--<Storage> to format the HDD. Then set
the HDD as "read/write''.
Note: at least one read/write HDD is needed for normal recording.
8.2 Video Settings
Go to <Main menu>-<record>-<Record Conf.>.
Channel] Choose the corresponding channel number.
[Redundancy] Choose the backup function to double backup the file.
[Length] Set time length of each video file between 1 minute to 120 minutes. 60 minutes as default.
[Mode] Set video state: schedule, manual or stop.
[Configuration] Record according to the set video type (common, detection) and time section.
[Manual] Corresponding channels start recording 24 hours non-stop.
[Stop] Whatever state the channel is in, the corresponding channel recording stops when stop button is selected.
[Period] Set time section of common recording, The recording will start only among the set range.
[Record type] Set recording type: regular, detection, alarm. Regular: Record according to the set time selection.
The video file type is "R".
[Detect]: Within the set time section, triggering motion detect, video blind, video loss or abnormal analysis. When
above alarm is set as opening recording, the recording detection state is on. The video file type is ''M''.
[Alarm]: trigger external alarm signal in the set time section. When above alarm is set as opening recording, the
"detection recording'' state is on. The video file type is ''A".
7
Advertenties
Inhoudsopgave
