Advertenties
Beschikbare talen
Beschikbare talen
Settings and operation
Press "Menu" to switch to the Menu.
Slave setting
When display shows "SLAV" it's in slave mode
Factory value setting
When display shows "REST" press "ENTER" to set the unit back into factory settings.
DMX Settings
Channel DMX Value
1
0 - 255
2
0 - 255
3
0 - 255
4
0 - 255
5
0 - 255
0 – 7
6
8 - 255
0 – 7
7
8 - 255
0 - 29
30 – 74
75 - 119
8
120 – 164
165 – 209
210 – 255
A DMX signal terminator is recommended to avoid a bad signal caused by other electrical devices. A DMX terminator is a
XLR connector with a 120Ω resistor between pin 2 and pin 3 of the XLR connector. Connect it to the last OUTPUT socket
of the final light.
See picture:
IN
OUT
DMX address setting.
When display shows "address" you can set the DMX address. Press
"ENTER" to set address.
Press "UP" or "Down" to adjust the value (001 – 512), press "ENTER" to
save the address setting.
Work mode setting.
When display shows G-x (x = mode number 0 - 4)
0 = DMX control
1 = Auto mode
2 = Sound activation 1
Press "UP" and "DOWN" button to adjust, press "ENTER" to save.
Function
Dimmer
Red dimmer
Green dimmer
Blue dimmer
Flash
DMX mode CH1-5
Color Fade slow-fast + Dimmer CH1
DMX mode CH1-5
Color jump slow-fast + Dimmer CH1
DMX mode CH1-7
Auto mode
Sound active mode 1
Sound active mode 2
Sound active mode 3
Sound active mode 4
IN
3 = Sound activation 2
4 = Sound activation 3
OUT
- 4 -
IN
OUT
120Ω
Advertenties
