Advertenties
Beschikbare talen
Beschikbare talen
Congratulations on your purchase of this Bo-Camp quality product.
Before using the windbreak
• Please read these instructions thoroughly before use and follow the instructions
below for optimum use and long life of this windbreak.
• Check that everything is complete; windbreak; 4 guy ropes; 7 ground pins and
1 repair patch.
• Set up the windshield as a test before using it.
• This windbreak is not designed to withstand storms; it may be necessary to
flatten the windbreak. Damage caused by strong winds is not covered by the
warranty.
• On the side are zippers to which another Bo-Camp Air Windshield can be
zipped.
Usage
• Always keep gas burners, lights, cigarettes and other open flame devices far
away from your windbreak and follow the safety instructions for this
equipment.
• Make sure you are aware of the safety regulations on the campsite and what to
do in case of fire.
• Preferably do not stand directly under trees because trees can secrete resin
and birds poop.
• This windbreak has an anti-UV coating. However, depending on the intensity of
the sun and the degree of use, the windbreak fabric may discolor sooner or
later. In case of a pitch for a longer period of time, a shady spot is
recommended.
• Always knock pins and pegs into the ground at an angle; stabbing at right
angles to the guy rope.
Storage and maintenance
• Store pegs separately in a bag, not directly against the windbreak fabric.
• Store the windbreak in a dry and well-ventilated room and open the zipper a
little bit so the material is able to air.
• When dealing with mold, dry the windbreak thoroughly and carefully remove
the mold by brushing.
• Only use specialized tent cleaning products to remove difficult stains as other
domestic chemical products can cause the cotton to degrade.
Pitching the windbreak
• Spread the windbreak and fix the corners with 2 ground pegs.
• On the windbreak, there is a double valve on the air tube. Tighten the whole
valve B (by hand). Unscrew only the cap (A in the picture) of the valve and
connect the pump tube to it.
• Pump the air tube at 0.5 bar or 7 psi. It may be necessary to help the top
come up.
User instructions Windbreak Air
Advertenties
