Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATING THE APPLIANCE
Intensive freezing
This appliance has an intensive freezing function. This function decreases the temperature in
the freezer compartment as quickly as possible. Activate this function 24 hours before you put a
large quantity of fresh food in the appliance.
When the intensive freezing function is selected, the appliance works at maximum
capacity. It may then make more noise for a while.
When the intensive freezing function is selected, the refrigerator compartment also
becomes colder than normal.
Switch on the intensive freezing function
Push (several times) the function button until the corresponding indicator light comes on.
The intensive freezing function is switched on.
Switch off the intensive freezing function
Push (several times) the function button until the corresponding indicator light goes off.
The intensive freezing function is switched off.
When the intensive freezing function is not switched off manually, the function will be
switched off automatically after about 48 hours.
High temperature alarm
The alarm indicator for high temperature flashes when the temperature in the appliance is too
high.
A high temperature can be caused for several reasons:
•
The appliance has been switched on for the first time.
•
The door has been opened for too long or too frequently.
•
The door does not seal properly.
•
Too much fresh food has been put in at the same time.
•
The appliance has been switched on again (for example after a lengthy power failure).
The alarm indicator will continue to flash as long as the temperature is still too high.
Attention; if after 24 hours the alarm indicator still flashes, contact the service
department.
EN 17
Advertenties
Hoofdstukken
Inhoudsopgave
