SYSTEM FEATURES
All UHF Series systems offer a variety of exceptional features, including:
1. Multiple System Use: Up to several UHF systems can be used in the same performance
space. Each system must be set at a different frequency. (Frequency marked on the back
of the receiver)
2. Simultaneous Output Use: Unbalanced 6.3mm phone plug and balanced XLR output
connectors may be used simultaneously to different external devices.
3. Range: UHF Series transmitters will work at a distance of up to 50 meters from the
receiver.
4. Noise Squelch: Squelch circuit analyzes signal strength and quality so that can reduces
the likelihood of noise burst due to environmental RF (radio frequency) noise.
5. Low Battery Warning Light: A red light on the body-pack and hand -held transmitters
warns the user that there is less than one hour of battery life left.
RECEIVER FEATURES
SINGLE CHANNEL RECEIVER
DUAL CHANNEL RECEIVER
1. Power Switch: Power ON/OFF the receiver.
2. Volume Knob: Adjust the volume output of receiver.
3. "RF" signal-lndicator:ltis glows when the Receiver receive RF signal from Transmitter.
4. Power Indicator: Indicate the power ON/OFF.
5. "AF"Audio Level Indicator: Indicate the wireless system audio signal level.
6. Antenna A/B.
7. XLR Balanced Output Jack: Connect the audio cable from this jack to the input port of
amplifier, mixer.
8. 6.3mm Audio Output Jack: Connect the audio cable from this jack to the input port of
amplifier, mixer.
9. Power Jack: Connect the AC/DC adapter to receiver.